Let us help you design your office fronts and provide all specs related to your project.

Enter »

Unikmatic Corner

Unikmatic Corner Office Fronts
Consider this design approach when trying to create not only a special design to your office or conference area, but when you desire to have wider access to these environments with corner doors. This system too utilizes Klein’s proven synchronized movement between two glass panels. It is only necessary to move one door to slide the second one.
This configuration allows you to get 2 sliders sliding in opposite directions in a corner allowing the doors to stack along 2 walls requiring only half of the space of the entire opening. A synchronized feature is applied for the doors to slide simultaneously along the walls. The glass panels can be up to 10’ high. It is usually applied for openings from 3’-0” to 4’-0” for each corner. No floor track is required at the passageway. The track can be mounted either to the wall or to the ceiling. An overlap of 2” between the fixed and the sliding panels will be applied. The system is available in clear anodized aluminum finish.
Warning: A ratio of maximum 1/3.5 must be kept for the width/height of the door in order to guarantee a good sliding movement.

Enter the following information to provide you detailed drawings of your application