Let us help you design your office fronts and provide all specs related to your project.Enter »
Rollglass Office Fronts
Integrating the sliding door and fixed side-lite glass panels within the same track enhances aesthetic, acoustics and ease of installation. The top track can be surface mounted or recessed for cleaner more aesthetic design approach. A short 90º glass panel return between offices can be applied to avoid breaking the rhythm of the glass panels and the loss of transparency.
This configuration (fixed-fixed-fixed-sliding) allows you to get half of the opening with a fixed glass panel and the other half with the slider to get an optimum clear opening. A “self-closing” feature can be applied for the door to close by itself with 8 different speed settings. The door can also be placed in a “hold open” position as well. It is usually supplied for openings from 10’-0” to 16’-0”, but our tracks can be butt-jointed to continually run an entire hallway. The glass panels can be up to 10’-0” high, but our tracks can be butt-jointed to continually run an entire hallway. No floor track is required at the passageway, only under the fixed panels. An overlap of 2 3/8” between the fixed and the sliding panels will be applied to assist in noise reduction. The system is available in clear anodized aluminum finish.